Find My HoopMagnetic embroidery hoop guide

SAMF180 vs SAMF180N: choose by machine

SAMF180 and SAMF180N are different Brother magnetic frames. SAMF180 is nominally 5 × 7; SAMF180N is 4 × 7. Match the full SKU to your machine before comparing dimensions or sellers.

Compare listed hoops
Concept illustration of an embroidery machine, magnetic hoop and embroidered fabric.
Concept illustration · Equipment shown is illustrative.

Exact-model choices covered by this guide

Current guide coverage; not an all-market compatibility list
MachineExact partNominal frameCompatibility evidence
Brother NQ1700ESAMF1805x7 inBrother (manufacturer)
Brother PE800SAMF180N4x7 inBrother (manufacturer)
Brother PE900SAMF180N4x7 inBrother (manufacturer)
Brother SE1900SAMF180N4x7 inBrother (manufacturer)
Brother SE2000SAMF180N4x7 inBrother (manufacturer)
Brother NS1250ESAMF180N4x7 inBrother (manufacturer)
Brother NS2850DSAMF180N4x7 inBrother (manufacturer)

Nominal frame size does not establish usable embroidery area. Select a part above for its conditions and named seller.

Brother SAMF180

Magnetic Sash Frame

SKU SAMF180

MANUFACTURER-LISTED

Listed models: Brother NQ1700E

Where to buy

View at Sewing Machines Plus

Product link checked 2026-10-30

Ordinary product link. Price and availability at seller.

Conditions for this match

  • For materials up to 2 mm thick.

Nominal frame: 5x7 inches. Usable embroidery area is not established by this frame size.

Compatibility sources

Brother SAMF180N

Magnetic Frame

SKU SAMF180N

MANUFACTURER-LISTED

Listed models: Brother PE800, Brother PE900, Brother SE1900, Brother SE2000, Brother NS1250E, Brother NS2850D

Where to buy

View at Ken's Sewing Center

Product link checked 2026-10-30

Ordinary product link. Price and availability at seller.

Conditions for this match

  • For materials up to 2 mm thick.
  • Update the machine software to the latest version. If the magnetic frame cannot be selected, consult an authorized dealer before use.
  • Avoid stiff or stretchy fabrics and thick jackets. Special finishes, including non-slip backing, may prevent use even below 2 mm.
  • Select the magnetic frame on the machine and check the stitching area for foot clearance. Read the manual, including magnet warnings, before use.

Nominal frame: 4x7 inches. Usable embroidery area is not established by this frame size.

Compatibility sources

Which listing should you open?

For NQ1700E in this guide

Use the SAMF180 listing and its Brother compatibility source. Its condition is materials up to 2 mm thick. The similar SAMF180N name is not a substitute for a model match.

For the six SAMF180N models shown

Keep the N suffix when searching shops. Check the software, magnetic-frame selection, fabric exclusions and clearance instructions; thickness alone does not establish suitability.

If your machine is not in the table

Use the finder or consult the manufacturer’s complete list. This table covers the machines supported by this guide, not all machines sold by Brother. It does not establish that an unlisted model is incompatible.

About this guide

Each product includes compatibility sources and check dates. This guide covers the listed matches; other hoops may also be compatible. Find My Hoop has no approved affiliate relationships with the listed merchants; seller links are ordinary product links.