Find My HoopMagnetic embroidery hoop guide

Magnetic hoops for Brother SE1900

For SE1900, Brother lists SAMF180N and DIME by OESD lists SH00A6M (LM6). These are two distinct magnetic frames: nominal 4 × 7 and 5 × 7. Choose by exact compatibility and requirements, not the larger number alone.

Compare listed hoops
Concept illustration of an embroidery machine, magnetic hoop and embroidered fabric.
Concept illustration · Equipment shown is illustrative.

2 documented matches for SE1900

Exact products and compatibility sources
ProductEvidenceNominal frameUsage conditions
Brother SAMF180Nmanufacturer-listed4x7 inFor materials up to 2 mm thick.
DIME SH00A6Mmanufacturer-listed · DIME by OESD5x7 inNot recorded

Full requirements and named sellers are listed with each product below.

Brother SAMF180N

Magnetic Frame

SKU SAMF180N

MANUFACTURER-LISTED

Where to buy

View at Ken's Sewing Center

Product link checked 2026-10-30

Ordinary product link. Price and availability at seller.

Conditions for this match

  • For materials up to 2 mm thick.
  • Update the machine software to the latest version. If the magnetic frame cannot be selected, consult an authorized dealer before use.
  • Avoid stiff or stretchy fabrics and thick jackets. Special finishes, including non-slip backing, may prevent use even below 2 mm.
  • Select the magnetic frame on the machine and check the stitching area for foot clearance. Read the manual, including magnet warnings, before use.

Nominal frame: 4x7 inches. Usable embroidery area is not established by this frame size.

Compatibility sources

DIME SH00A6M

Snap Hoop Monster

SKU SH00A6M · Also listed as LM6

MANUFACTURER-LISTED · Hoop maker: DIME by OESD

Where to buy

View at Sewing Parts Online

Product link checked 2026-10-30

Ordinary product link. Price and availability at seller.

Conditions for this match

  • No specific conditions recorded. Confirm requirements in the source and with the seller.

Nominal frame: 5x7 inches. Usable embroidery area is not established by this frame size.

Compatibility sources

Two sizes, two product-specific decisions

Separate frame size from stitching area

SAMF180N is nominally 4 × 7; LM6 is nominally 5 × 7. Those dimensions do not establish a larger usable embroidery area for your design. Check the frame selection and the product instructions.

Apply the right conditions

SAMF180N has software, fabric and clearance requirements shown above. DIME’s compatibility chart establishes the LM6 model match but supplies no numeric material limit or minimum software version for it.

Keep LM6 distinct from LM1

LM6 / SH00A6M is the DIME option listed for SE1900. LM1 / SH00A1M also has a 5 × 7 nominal frame, but it has different model mappings. Do not substitute it based on size.

Explore models and sizes

Choose the exact model. Each guide identifies its source-listed hoops.

About this guide

Each product includes compatibility sources and check dates. This guide covers the listed matches; other hoops may also be compatible. Find My Hoop has no approved affiliate relationships with the listed merchants; seller links are ordinary product links.