Find My HoopMagnetic embroidery hoop guide

Magnetic hoops for Brother SE2000

Brother lists SAMF180N for SE2000; DIME by OESD lists SH00A6M (LM6). Start with those two exact parts, then compare their nominal frame sizes and product-specific requirements before visiting a seller.

Compare listed hoops
Concept illustration of an embroidery machine, magnetic hoop and embroidered fabric.
Concept illustration · Equipment shown is illustrative.

2 documented matches for SE2000

Exact products and compatibility sources
ProductEvidenceNominal frameUsage conditions
Brother SAMF180Nmanufacturer-listed4x7 inFor materials up to 2 mm thick.
DIME SH00A6Mmanufacturer-listed · DIME by OESD5x7 inNot recorded

Full requirements and named sellers are listed with each product below.

Brother SAMF180N

Magnetic Frame

SKU SAMF180N

MANUFACTURER-LISTED

Where to buy

View at Ken's Sewing Center

Product link checked 2026-10-30

Ordinary product link. Price and availability at seller.

Conditions for this match

  • For materials up to 2 mm thick.
  • Update the machine software to the latest version. If the magnetic frame cannot be selected, consult an authorized dealer before use.
  • Avoid stiff or stretchy fabrics and thick jackets. Special finishes, including non-slip backing, may prevent use even below 2 mm.
  • Select the magnetic frame on the machine and check the stitching area for foot clearance. Read the manual, including magnet warnings, before use.

Nominal frame: 4x7 inches. Usable embroidery area is not established by this frame size.

Compatibility sources

DIME SH00A6M

Snap Hoop Monster

SKU SH00A6M · Also listed as LM6

MANUFACTURER-LISTED · Hoop maker: DIME by OESD

Where to buy

View at Sewing Parts Online

Product link checked 2026-10-30

Ordinary product link. Price and availability at seller.

Conditions for this match

  • No specific conditions recorded. Confirm requirements in the source and with the seller.

Nominal frame: 5x7 inches. Usable embroidery area is not established by this frame size.

Compatibility sources

Before ordering for your SE2000

If choosing SAMF180N

Check the latest machine software and that the magnetic frame can be selected. If it cannot, consult an authorized dealer before use. Read the full fabric and clearance requirements above.

If choosing DIME LM6

Use the SE2000 row in the DIME by OESD chart and the complete SH00A6M SKU. The chart establishes the model match; ask the seller for the operating requirements that are not supplied there.

Do not carry a hoop choice over from another machine

SE1900 and SE2000 are both explicitly named for LM6 in the DIME chart. NQ1700E instead has LM1 in this guide. A shared 5 × 7 label is not a reason to substitute one part for another.

Explore models and sizes

Choose the exact model. Each guide identifies its source-listed hoops.

About this guide

Each product includes compatibility sources and check dates. This guide covers the listed matches; other hoops may also be compatible. Find My Hoop has no approved affiliate relationships with the listed merchants; seller links are ordinary product links.